In parks, communities, parks, green belts and other places, you can often see staff using wholesale green hedge trimmers to trim hedges, with them, you can create a more beautiful living and production environment, but did you know? As wholesale green hedge trimmer is used more frequently, its blades become dull and need to be polished regularly in order to carry out the trimming work smoothly. Today, Xiaobian will talk about the grinding method of wholesale green hedge trimmer blade.

1. Prepare tools and materials. In order to polish the blade well, you need to prepare some necessary tools and materials. The details are as follows: polishing paste, sandpaper, whetstone, handle, lubricating oil, small brush, etc.

2. Remove the blade. Unplug the wholesale green hedge trimmer from the power supply first to ensure safety. Then remove the fixing screw on the cover plate of the cutting machine and take out the blade as a whole.

Three, sandpaper grinding. As far as the sharpness of the blade is concerned, the thickness of the sandpaper depends on the actual situation. It should be noted that the sandpaper should be placed on a dry, clean and smooth surface. This helps prevent safety hazards caused by loose sandpaper when the cutter cuts.

On the one hand, the selection of sandpaper should be selected according to the size of its own particles, and on the other hand, it should be considered according to the degree of the grinding blade. Grind back and forth on both sides of the wholesale green hedge trimmer blade until the sharpness is satisfied.

Four, polishing paste grinding. The use of polishing paste can make the surface of the blade smoother, so that it is more convenient to use. Polishing paste generally choose white color is better. Apply the polishing paste to the sandpaper and gently sand along the sharp side of the blade until smooth and sharp.

5. Polish the whetstone. The use of an oil stone tray allows for more stable pressing while maintaining sharpness. The choice of oil stone can affect the cutting quality of the blade.

In general, there are many options for the material of the oil stone, such as fine stone, silicon carbide sand, white gold stone, diamond and so on. Choose a suitable oil stone, soak in oil, then pay attention to clamp the oil stone pan with oil, and then clamp the wholesale green hedge trimmer blade in the jig, with the oil stone pan for grinding. Change the other side and polish again.

6. Overall inspection. After the above steps, the polishing of the wholesale green hedge trimmer blade has basically been successfully completed. But it is also extremely important to do a thorough inspection of the entire scissors to ensure safe use.

Is the use of the blade up? What is the balance of the blade? Does the blade operate smoothly? Wait, we need to examine these issues carefully.

wholesale green hedge trimmer blade grinding is a meticulous job, we must be careful and patient, choose the right grinding tools or materials can better finish the blade grinding work. During grinding, always pay attention to the sharpness of the blade and the smoothness of the blade surface. While sharpening the knife into light, the safety issue must not be forgotten. Only by doing every step of the work can we ensure that the wholesale green hedge trimmer has an efficient performance when trimming.

wholesale green hedge trimmer https://www.keylead.cn/Electrical-Hedge-Trimmer-Straight-Blade